Skip to content
Diamond Deck
Diamond Deck
Get a QuoteCall (251) 443-7474

(251) 443-7474. Mon to Thu, 7:30 am to 4:30 pm, Fri, 7:30 am to 2:30 pm, Central time.

Diamond Deck, by Diamond Scaffold Services

Demo store. No payment is taken and nothing is sent. For real pricing, request a quote.

Rolling scaffold tower with wooden toeboards around a steel deck, held at each corner by orange toeboard brackets clamped to the posts

U.S. Patent Pending

Diamond Deck Toeboard Bracket

A steel toeboard bracket that clamps to a vertical scaffold tube and holds two toeboards in adjustable pockets. No tie wire or nails, and no changes to the scaffold.

$50each to buy, or $2.08 each per month to rent

Indicative Pricing

Buy or Rent

Fit testing on major tube scaffold systems is in progress. We confirm fit for your job before you order.

Purchase, 100 x $50.00$5,000
Freight Estimate$45
Total$5,045

Indicative pricing. Freight is a demo estimate of $45 per 100 brackets. Real orders are confirmed by quote.

Request a Quote Instead

Spec Highlights

Material
Steel
Boards
2x4 dimensional lumber or metal toeboards
Arm Length
about 6-1/4 in
Board Pocket
about 2 x 2 x 2 in
Adjustment
at least 180 degrees, plus independent coupler rotation
  • Designed to the toeboard requirements of 29 CFR 1926.451(h)(4). Load testing in progress.
  • Steel with a high-visibility orange coating.

Full Specs and SafetySubmittal Pack

Each Bracket Includes

  • Tube Coupler

    A C-shaped clamp with a clamp screw grips the vertical scaffold tube.

  • Two Bracket Arms

    Arms of about 6-1/4 in end in pockets sized for 2x4 lumber, about 2 x 2 x 2 in.

  • Set-Screw Pockets

    A set screw locks each board in its pocket.

  • Pivot Lock

    A pin-and-sleeve pivot sets the arms straight, at a 90 degree corner or any angle, then locks.

Install in Three Steps

  1. Close-up of the orange swivel clamp of a toeboard bracket fastened around a round steel scaffold post
    1

    Clamp

    Tighten the coupler onto the vertical tube at deck level.

  2. Close-up of an orange toeboard bracket seated over a wooden toeboard with its bolt tightened against the board
    2

    Set the Angle

    Swing the arms straight for a run or square for a corner, then lock the pivot.

  3. Orange toeboard bracket clamped to a scaffold post, its bolt pinning the wooden toeboard, with a second bracket at the far corner
    3

    Drop In the Boards

    Seat the toeboards in the pockets and snug the set screws.